As of today, a few models of TV Satellite Receivers which allow IPTV are available on the Nigerian Market. Some of the Q-Sat receivers as well as the STRONG receivers (SRT 4930L, SRT 4922/A, SRT 4950H)have this feature.

1. Manual Cccam Alma S2200download Free Software Programs Online Courses
2. Manual Cccam Alma S2200download Free Software Programs Online Free

Those receivers have already a built-in IPTV channel list, however you can added more channels if you want, and it’s FREE. How to proceed to add new IPTV Channels on your STRONG Receiver?.

As usual, please make sure your receiver is updated with the latest STRONG software. You can to download the latest software. Go Menu, then Entertainment, then IPTV.

Press F2 on your remote control. A pop-up will open:. Insert the channel name as well as the URL of the channel you want to watch.

.SEE FOR YOURSELF.OrCam User Manual Version 3.0 FCC Compliance This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.© 2014 OrCam Technologies Ltd.

All rights reserved. OrCam™ is the trademark and brand name of OrCam Technologies Ltd. (“OrCam”) and OrCam is the sole proprietor of all the rights and all the intellectual property rights in this manual and/or any other document produced by OrCam relating thereto.Base Unit is covered and protected.

Do not use OrCam in heavy rain, when at the beach or swimming pool, or in or near a bathtub or shower. Do not submerge the OrCam device in any type of liquid.OrCam User Manual Version 3.0 Table of Contents About the OrCam Device.1 Assembling the OrCam Device.5 Getting Started.10 Reading with OrCam.14 Object Learning Mode.20 Instructions for Software Updates using SD Card.24 Troubleshooting.OrCam website. We recommend that you view the tutorial videos at: www.orcam.com/tutorials OrCam Components The OrCam device consists of two main parts, the Head Unit and the Base Unit.OrCam device to read text to you and help you identify objects.

To help orient yourself to the OrCam device, the top of the device has the OrCam label. Throughout this manual, we will reference the blue buttons on the Base Unit and explain when you should use them.When you recharge the battery, you will connect the charger to the Base Unit. OrCam Buttons The OrCam device unit has three buttons: Power, Volume, and Trigger. Location of Power and Volume Buttons and LED Indicator Power Button is a small square shaped blue button, on the right side of the Base Unit nearest to the socket for the Head Unit cable.LED Indicator is near the volume button. The light may be steady or may blink.

When the light is red, it indicates that the OrCam device is charging. When the light is green, it indicates that the OrCam device is powered on.This chapter details how you connect the device to your glasses. Because OrCam is light and small, you can leave it attached to your glasses so that it is always ready for use.Head Unit, it is possible to remove it with a small screwdriver. Attaching the Mount to the Eyeglasses The Head Unit of the OrCam device is designed to be mounted on the right side of your eyeglasses.

Therefore, the mount must be placed on the.OrCam User Manual Version 3.0 To attach the mount to the eyeglasses: 1. Check the mount.

On the inside, opposite the keyhole, is a small rubber piece that you can feel with your finger. Occasionally, this piece may fall out in the package. If you feel a hole instead of a bump, locate the missing piece in the package and replace it.Note: If the camera is angled too high or too low, the OrCam camera may not be accurately triggered, and may not perform correctly. Place the wire behind your ear and tug on it slightly. Verify that the mount remains straight and the camera remains facing forward, and does not twist to face upwards.OrCam User Manual Version 3.0 Connecting and Using the Base Unit The Base Unit, the black box with blue buttons on either side, should be connected to the Head Unit via a cable that plugs into a fitted connection at the end of the black box. Once it is connected, the Base Unit can be clipped to your belt or placed in a pocket, pouch, or other carrying case.Version 3.0 Getting Started Initial Charging of the OrCam Device Before you begin using the OrCam device, you must initially charge it for a period of eight hours.

For your convenience, the charger is included in the package. To charge the OrCam device: 1.After approximately 1-2 minutes you will hear, “OrCam Version 3.X is ready. Battery is XX percent charged.” 2. If you did not hear the phrase, “OrCam is ready,” or you are not sure that the unit is on, press one of the volume buttons (UP or DOWN).1. Press the TRIGGER button.

You will hear OrCam say, “Waking up.” Changing the Reading Speed It is possible that OrCam will read to you at a rate that is too fast or too slow and you will want to change the reading speed. To change the reading speed: 1.C as well). See the commands section at the end of this manual for the printed command. Point at the OrCam Please command or use the trigger button. The device will say: “To change voice use volume buttons.”.OrCam User Manual Version 3.0 Reading with OrCam The OrCam device knows when you want it to read to you by triggers that you give the Head Unit. There are three ways to trigger the Head Unit to begin reading. These include: Pointing with your finger.Beginning to Read When you hold an object, such as a book or newspaper, you don’t have to touch the item while pointing to it for the OrCam device to work, but many people find it easier to actually touch the item.If you would like to stop the reading before OrCam has finished, press the trigger button and it will stop right away.

When OrCam reaches the end of a page, it plays a chime sound to signal that it has finished. If OrCam thinks that there is additional text at the bottom of the page that it cannot see, when it reaches the end of the page or section, it will announce: “There may be more text below.OrCam User Manual Version 3.0 In this case, you can point to the lower part of the page, and the OrCam device will begin reading from the beginning of the last paragraph. It may also announce “Skipping XX lines” and continue from where it left off.OrCam User Manual Version 3.0 Messages when Having Trouble Recognizing Text If the OrCam device is having trouble recognizing the text, it may say one of the following messages: The message is played when Continuation is cut-off, please OrCam detects that the section turn your head a bit to the left the user is trying to read is 'cut'.Nonstop Reading The OrCam device’s default mode of operation is “Nonstop reading mode”. In this mode, the OrCam device will continue reading even if you move the document your reading out of view of the OrCam camera. With this mode enabled there is no need to keep holding the document in front of you while reading.This feature is designed to recognize products with unique textures, usually found on labels and packaging. The more texture on the product, the easier it will be for the OrCam device to recognize it.

Manual Cccam Alma S2200download Free Software Programs Online Courses

You will receive the best results with objects that are between the size of a playing card and the size of a cereal box.OrCam User Manual Version 3.0 Failed to learn product. The OrCam device was not successful in Canceled product learning the new product and has learning. Best to have a terminated product learning. Clear background.

Please name the product The OrCam device has successfully learned after the beep.OrCam User Manual Version 3.0 Finished new product At the end of the process, the OrCam learning. Product name device will confirm that it has successfully XXXX learned the new product. Error occurred while A database error has been detected.This product seems like XXXX. If You will receive this message if you would like to teach the you try to teach the OrCam product you are holding, press device a product that is similar or the button briefly. If you do not.Remove the current SD card Before you can insert the new SD card you received from OrCam, you must first remove the current SD card. Open the rear cover of the device. Push a paper clip (or something similar) into the notched opening and pry the cover open and remove.Note: This is the side that does not have the Base-to-Head Unit cable attached to it.

Locate the SD slot on the left end panel of the OrCam device. Hold the card so that the metal part faces the metal connectors of the OrCam device.OrCam device.

Insert the latest SD card into the device. Connect OrCam to the power supply. The LED light should initially turn red and about 20 seconds later, it will turn green. About a minute after the device begins charging, it will announce, “Software update will now begin.OrCam User Manual Version 3.0 Verifying that the Upgrade is Complete 1. If you wish, you can verify that the OrCam device has been updated. Turn the OrCam device off and then on again as you normally would. Listen to the startup message to verify the current version of the OrCam software: “OrCam Version XX is ready.Lighting and Other Considerations Just as we need a certain level of lighting to enable us to read, OrCam too is sensitive to light.

When using OrCam, consider the following: Avoid strong light in the camera. If are facing a window or a lamp such that the light is shining directly into the camera, OrCam may not be able to focus properly on text.Reading As OrCam is reading, you may encounter some of the following messages. Text is too small. Try to hold it This message appears when closer.1. You may be holding the book at an angle that makes it difficult to read the text.

You may have moved your head or the book while the OrCam was taking a picture of the text. An easy solution is to use a book holder.OrCam User Manual Version 3.0 OrCam System Messages Following are a list of some of the OrCam system messages that you are likely to hear during normal operation. OrCam Version XX is ready OrCam is now ready to begin operation.The battery is too low to enable down, please wait.

You must charge the battery and then restart the device. Charger connected.

The charger is connected and OrCam is currently charging. Charger disconnected. The charger is now disconnected and the OrCam device is no longer charging.OrCam User Manual Version 3.0 Temperature is too low. You are operating the OrCam device Shutting down, please wait. In a location where the temperature is too low for normal use. It is shutting down to prevent damage.

Battery is XX percent charged.OrCam User Manual Version 3.0 Cleaning the Device Base Unit Clean the Base Unit immediately if it comes in contact with anything that may be sticky or cause stains. Remember to turn the device off before you begin. Only clean the device with a damp cloth; do not submerge the device in water or pour water onto it.Note: Pointing to these commands and having OrCam read them is the same as using the commands themselves. Space is intentionally left above and below the “OrCam Please” commands to enable you to use this area as a way of triggering the OrCam device to accept these commands. Change Voice.Version 3.0 Nonstop Reading These commands are used to enable and disable non-stop reading of a text section. At the end of the section, OrCam will play the chime sound followed by the message 'Nonstop Reading Enabled' or “Nonstop Reading Disabled.”.Setting the internal clock: Please visit: www.orcam.com/timeset Read the “OrCam Please Set Time” command on the screen.

Manual Cccam Alma S2200download Free Software Programs Online Free

Click the text to toggle between the Set Time and Tell Time commands. Read the “OrCam Please Tell Time” command to verify time has been correctly set.Product or take any other action to the detriment of OrCam’s IP Rights in such. OrCam shall be entitled to make periodic upgrades to the Product as it deems necessary. Customer shall fully cooperate with OrCam in making such upgrades and any effort to prevent such upgrades shall be deemed a fundamental breach of this Agreement.Such information will be reviewed and deleted by OrCam when no longer needed.