• Pc Efi 10.5 Boot File Player

If you want to change the boot priority, enable or disable secure boot or change any other low-level settings, then you need to boot into UEFI mode. Depending on the motherboard manufacturer, you have to press specific keys or a combination of keys on your keyboard to access UEFI mode. Though the splash screen displays the keys you need to press, it can be pretty confusing for beginners. If you are ever in this situation, you can boot into UEFI mode directly from Windows.

This eliminates the need to press relevant keys as fast as possible at boot time.Booting into UEFI from Windows is not hard. However, you can only do this if your motherboard supports or has a UEFI chip on it.

If your motherboard doesn’t support UEFI, you cannot boot into UEFI from Windows. That being said, most modern motherboards come equipped with a UEFI chip and supports both UEFI and legacy BIOS. If you don’t know or are unsure whether your motherboard supports UEFI or not, you can easily verify that directly from Windows.Related: Check If Your System Supports UEFI or Legacy BIOSThere are several ways to check if you are using UEFI or BIOS.Windows displays all the system information in a single app called System Information. By accessing the System Information application you can find whether you are using BIOS or UEFI.1. Press Win + R, type msinfo32 and press Enter. This action will open the System Information app.2. Select “System Summary” on the left panel.

On the right panel you can see whether you are using BIOS or UEFI next to “BIOS Mode.” If you see UEFI, then your system is using UEFI bios. If you see “Legacy,” then your system is using Legacy BIOS.Alternatively, you can also find it using the Disk Management tool.1. Open the Start menu and search for “Check and format hard disk partitions” and open it. Don’t worry, we are not going to partition or format your hard drive.2. If you see a partition named “Healthy (EFI System Partition),” then your system supports UEFI.

If you don’t have this partition, then your system is using Legacy BIOS.Once you’ve confirmed your motherboard’s support for UEFI, proceed to the next steps of booting into UEFI directly from Windows 10. Boot into UEFI from Settings AppTo boot into UEFI from the Settings panel, we are going to use the Advanced Start-up options.1. Search for “Settings” in the Start menu and open it. Go to “Update and Security - Recovery,” and click on the “Restart Now” button under the Advanced Start-up section.2.

In the Advanced start-up screen go to “Troubleshoot - Advanced options,” and click on the “UEFI Firmware Settings” option.3. On the next screen click on the Restart button, and you will be taken to the UEFI screen. Boot into UEFI from Command PromptYou can also boot into UEFI from Windows by executing a single command.1. Search for Command Prompt in the Start Menu, right-click on it and select the option “Run as administrator.”2.

In the command prompt, execute the below command.

Since most PC these days hardly come with an in-built DVD drive, your options are further limited to either using an external DVD drive or a USB flash drive.A lot of people, including me, will favor using a USB flash drive to install Windows 10. However, if you have newer hardware, it’s likely that you’re using Unified Extensible Firmware Interface (UEFI), instead of the legacy Basic Input/Output System (BIOS). If this is the case, you also have to ensure that the bootable media supports the firmware type before you can proceed with the installation. How is UEFI different from BIOS?The BIOS will soon be dead: Intel has announced on all their chipsets by 2020.

But what is UEFI, and how is it different from the BIOS we’re all familiar with?Both UEFI and BIOS are low-level software that starts when you boot your PC before booting your operating system, but UEFI is a more modern solution, supporting larger hard drives, faster boot times, more security features, and—conveniently—graphics and mouse cursors.Fortunately, if your device features a UEFI firmware, you have multiple ways to create a USB bootable media to install Windows 10, Windows 8.1 or Windows 7. You can, which is an easy-to-use utility made by Microsoft that downloads and copies the installation files onto a removable drive with support UEFI and BIOS. Or you can, which is a freely available third-party tool that allows you to quickly create a media with support for UEFI firmware. Further Reading: In this guide, we’ll try to walk you through the steps to create a bootable USB flash drive with support for both BIOS and UEFI. First we will, this should work for Windows 10, Windows 8.1 & Windows 7.

However, some BIOS may not recognize your USB flash drive as a boot media, using the Media Creation Tool or will resolve this. Supported Windows OSThis guide has been tested with the following OS. Microsoft Windows XP—?. Windows 7—. Windows 8—. MS Windows 8.1—. Windows 10—Note, If you are performing a fresh installation of Windows 10 on a PC, you can skip straight to.

Further Reading: You can always fall back to our should you encounter any problems while creating your bootable USB flash drive. What you needBefore you begin, make sure you have an internet connection if you don’t already have a copy of the Windows OS install in a DVD,.iso or in a folder.

You should also have sufficient data storage available on a computer, USB or external drive for the download. Other requirements may include:. A copy of the Windows OS install.iso, in a folder or DVD. You can use to download a disc image (ISO file) that can be used to update or install Windows 10, Windows 8.1 or Windows 7. The image can also be used to create installation media using a USB flash drive or DVD.

Windows software download is free on the but you might need to purchase a license for usage. A blank USB flash drive with at least 5GB (or 4GB for Windows 8.1 and below) free space. This drive will be formatted, so make sure it doesn’t contain any important files. Technician PC – Windows PC that you’ll use to format the USB flash drive. Destination PC – A PC that you’ll install Windows onBoot Windows from your USB flash driveHaving met all, any of the three methods below will get you a bootable USB flash drive. Make sure to pay close attention and ask any questions you may have on the comment section.Troubleshooting: file copy failsOne of the most important thing to watch out for is the storage capacity of your USB flash drive. Windows 10 October release will require your flash drive to have at least 5GB storage capacity.Also, if you are using a modern PC and your device features a UEFI firmware, you will need to format your USB flash drive using FAT32 file system which has a file size limit of 4GB.

The (sources/install.wim) in Windows 10 October release exceeds this limit.Follow our to walk around this problem.Create a Windows 10, 8 & 7 Bootable USB Flash Drive without using a SoftwareHere’s how to create a bootable Windows installation USB drive starting with a Windows.iso file or a Windows Setup DVD without. Step 1 – Format the drive and set the primary partition as active. Connect the USB flash drive to your technician PC. Open Disk Management: Right-click on Start and choose Disk Management. Format the partition: Right-click the USB drive partition and choose Format. Select the FAT32 file system to be able to boot either BIOS-based or UEFI-based PCs. Set the partition as active: Right-click the USB drive partition and click Mark Partition as Active.Step 2 – Copy Windows Setup to the USB flash driveUse File Explorer to copy and paste the entire contents of the Windows product DVD or ISO to the USB flash drive.

Step 3 – Install Windows 10 / Windows 8.1 / Windows 7 to the new PC. Connect the USB flash drive to a new PC. Turn on the PC and press the key that opens the boot-device selection menu for the computer, such as the Esc/F10/F12 keys. Select the option that boots the PC from the USB flash drive.

Windows Setup starts. Follow the instructions to install Windows.

Remove the USB flash drive.How to create a Windows 10, 8 & 7 UEFI boot media using WinToFlash Software. WinToFlash creates a bootable USB with any modern Windows Desktop PHOTO CREDIT: EBENEZER OBASIIf for some reasons, didn’t work, you can use the WinToFlash tool to create an installation media with UEFI support. Of course, the will equally work if your target is to install Windows 10 on a PC. However, it’s faster to use this tool if your already have a copy of the Windows OS install in a DVD,.iso or in a folder.To create a Windows install media with support for UEFI, connect a USB flash drive with at least 5GB (or 4GB for Windows 8.1 and below) of space, and then use these steps: Step 1 – Download & Install WinToFlash Software.Download the free lite edition of WinToFlash from. Under “Download,” click Lite edition Setup Download.

Windows 10 installation progress on WinToFlash.Once the USB bootable with support for UEFI has been created, you can to perform an upgrade or clean installation of Windows 10.How to create a Windows 10 UEFI boot media using Media Creation ToolIf you’re planning to upgrade or install a fresh copy of Windows 10 on a system using BIOS or UEFI, you can use the Media Creation Tool to create a compatible bootable media. Just insert a USB flash drive with at least 5GB of storage to your computer, and then use these steps:. Open the. Under “Create Windows 10 installation media,” click the Download tool now button. Click the Next button.

Once you’ve completed these steps, the wizard will download the Windows 10 installation files, and it’ll create the bootable media with support for UEFI as well as legacy BIOS. Troubleshooting Windows 10, 8 & 7 Boot MediaUEFI systems cannot boot from NTFS and instead the device needs to be formatted with FAT32 which has a 4GB maximum size. If copy fails, it’s likely that the install.wim file on the media is larger than this file size limit.

The solution is to. Split the Windows imageSplit a Windows image (.wim) file into a set of smaller (.swm) files. Use this procedure when you’re installing Windows from media that can’t handle the Windows image file size, for example:.

DVDs (A standard single-sided DVD stores 4.7GB). USB keys formatted as FAT32. FAT32 is required to boot many modern (UEFI-based) PCs, but has a maximum file size of 4GB.Split the file. Mount your Windows distribution ISO. Launch Windows Command Prompt. The quickest and easiest way to do that is to type “CMD” into your Windows search box.

Right click on the resulting “ Command Prompt” and “ Run as Administrator”. Copy everything except the Windows image file (sourcesinstall.wim) to the USB drive. Either drag from the mounted ISO and drop on the flash drive, or use the command below:robocopy D: E: /s /max:Where D: is the mounted ISO and E: is the USB flash drive. Split the Windows image file into smaller files, and put the smaller files onto the USB drive:Dism /Split-Image /ImageFile:C:sourcesinstall.wim /SWMFile:C:sourcesinstall.swm /FileSize:3700where:. C:sourcesinstall.wim is the name and the location of the image file that you want to split. C:sourcesinstall.swm is the destination name and the location for the split.swm files. The first split.swm file is named install.swm file.

Pc Efi 10.5 Boot File Player

The file names for the next files include numbers, for example, install2.swm file, install3.swm file, and so on. 3700 is the maximum size in MB for each of the split.swm files to be created. Kepp the size of the files below 4000 (4GB) to avoid getting the error 87 (invalid parameters) error.Note, Windows Setup automatically installs from this file, so long as you name it install.swm.